The structural, vibrational and electronic properties of silica-supported Ziegler-Natta catalysts industrially relevant for polyethylene production were investigated in details by means of a multi-technical approach, at each step of catalyst preparation - including pre-catalyst activation. In the pre-catalyst, the TiClx phase is mainly grafted to the silica surface, and almost independent of the supported MgClx phase. However, the subsequent activation by means of an aluminum-alkyl compound causes important changes to both, the supported MgClx phase and the TiClx phase. The resulting catalyst is entirely reconstructed, so that most of the titanium sites are detached from the silica surface and in interaction with a highly dispersed MgCl2 phase, thus mimicking the most famous and highly investigated Ziegler-Natta catalysts (not silica-supported). For the first time, the catalyst performances were monitored by means of in situ FT-IR spectroscopy in transmission mode, simulating industrially significant polymerization conditions (i.e. ethylene is fed onto the catalyst in the presence of the activator and of the solvent). These results demonstrate that it is now possible to achieve a complete description at a molecular level of all the constituents of Ziegler-Natta catalysts, at each step of the catalyst preparation.

Activation and In Situ Ethylene Polymerization on Silica-Supported Ziegler-Natta Catalysts

GROPPO, Elena Clara;LAMBERTI, Carlo;BORDIGA, Silvia
2015-01-01

Abstract

The structural, vibrational and electronic properties of silica-supported Ziegler-Natta catalysts industrially relevant for polyethylene production were investigated in details by means of a multi-technical approach, at each step of catalyst preparation - including pre-catalyst activation. In the pre-catalyst, the TiClx phase is mainly grafted to the silica surface, and almost independent of the supported MgClx phase. However, the subsequent activation by means of an aluminum-alkyl compound causes important changes to both, the supported MgClx phase and the TiClx phase. The resulting catalyst is entirely reconstructed, so that most of the titanium sites are detached from the silica surface and in interaction with a highly dispersed MgCl2 phase, thus mimicking the most famous and highly investigated Ziegler-Natta catalysts (not silica-supported). For the first time, the catalyst performances were monitored by means of in situ FT-IR spectroscopy in transmission mode, simulating industrially significant polymerization conditions (i.e. ethylene is fed onto the catalyst in the presence of the activator and of the solvent). These results demonstrate that it is now possible to achieve a complete description at a molecular level of all the constituents of Ziegler-Natta catalysts, at each step of the catalyst preparation.
2015
5
9
5586
5595
http://pubs.acs.org/page/accacs/about.html
in situ spectroscopic techniques; polyethylene; polymerization; silica; Ziegler-Natta catalysts; Catalysis
Groppo, Elena; Seenivasan, Kalaivani; Gallo, Erik; Sommazzi, Anna; Lamberti, Carlo; Bordiga, Silvia
File in questo prodotto:
File Dimensione Formato  
Groppo_ACSCatal2015 - POSTPRINT.pdf

Open Access dal 02/12/2016

Descrizione: Articolo Post-Print
Tipo di file: POSTPRINT (VERSIONE FINALE DELL’AUTORE)
Dimensione 1.16 MB
Formato Adobe PDF
1.16 MB Adobe PDF Visualizza/Apri
15_ZN_C2H4_polym.pdf

Accesso riservato

Descrizione: Printed version
Tipo di file: PDF EDITORIALE
Dimensione 1.62 MB
Formato Adobe PDF
1.62 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2318/1531055
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 32
  • ???jsp.display-item.citation.isi??? 27
social impact