Tin dioxide nanowires have been grown by thermal oxidation of sputtered thin fi lms by means of a VLS method. A tin sputtered layer catalyzed by gold nanoparticles acts as a material seed for the localized growth of NWs directly on gas sensor devices, avoiding the manipulation and transport of the nanowires to the electrodes. XRD and HRTEM analysis show that the nanowires crystallize in a rutile structure with a [100] preferential growth direction, and are single-crystalline with diameters lower than 50 nm. The response of nanowires to formaldehyde has been compared to thin fi lm based sensors. A sensitivity of 0.10 ppm is reported, twofold the sensitivity of the thin fi lm, and short response and recovery times are measured (6 times shorter than thin fi lms). The sensing mechanism proposed for the SnO 2 NWs under formaldehyde exposure is explained by means of conduction measurements and FT-IR analysis. Oxygen species chemisorbed on the surface of each SnO 2 nanowire produce a band bending, which generates a potential barrier (of 0.74 0.02 eV at 300 C) between the point contact of di ff erent nanowires. As evidenced by IR spectroscopy at 300 C, electrons in the conduction band and in mono-ionized oxygen vacancies (at 0.33 eV below the bottom of the conduction band) are responsible for gas detection.

Formaldehyde sensing mechanism of SnO2 nanowires grown on-chip by sputtering techniques

MORANDI, Sara;
2016-01-01

Abstract

Tin dioxide nanowires have been grown by thermal oxidation of sputtered thin fi lms by means of a VLS method. A tin sputtered layer catalyzed by gold nanoparticles acts as a material seed for the localized growth of NWs directly on gas sensor devices, avoiding the manipulation and transport of the nanowires to the electrodes. XRD and HRTEM analysis show that the nanowires crystallize in a rutile structure with a [100] preferential growth direction, and are single-crystalline with diameters lower than 50 nm. The response of nanowires to formaldehyde has been compared to thin fi lm based sensors. A sensitivity of 0.10 ppm is reported, twofold the sensitivity of the thin fi lm, and short response and recovery times are measured (6 times shorter than thin fi lms). The sensing mechanism proposed for the SnO 2 NWs under formaldehyde exposure is explained by means of conduction measurements and FT-IR analysis. Oxygen species chemisorbed on the surface of each SnO 2 nanowire produce a band bending, which generates a potential barrier (of 0.74 0.02 eV at 300 C) between the point contact of di ff erent nanowires. As evidenced by IR spectroscopy at 300 C, electrons in the conduction band and in mono-ionized oxygen vacancies (at 0.33 eV below the bottom of the conduction band) are responsible for gas detection.
2016
6
22
18558
18566
http://pubs.rsc.org/en/journals/journalissues
Chemical Engineering (all); Chemistry (all)
Castro Hurtado, I.; Gonzalez Chávarri, J.; Morandi, Sara; Samà, J.; Romano Rodríguez, A.; Castaño, E.; Mandayo, G. G.
File in questo prodotto:
File Dimensione Formato  
RSC Advances 6 (2016) 18558-18566.pdf

Accesso aperto

Descrizione: articolo principale
Tipo di file: PDF EDITORIALE
Dimensione 850.39 kB
Formato Adobe PDF
850.39 kB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2318/1557746
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 15
  • ???jsp.display-item.citation.isi??? 13
social impact