The possibility of replacing net with film to tie large round bales for silage making was investigated. A specifically designed polyethylene film has been developed and used to replace the typical net wrapping. A film-tying device, which was already on the market, was fitted to a variable chamber round baler and used instead of the standard net-tying system. A total of 48 round bales, consisting of half Italian ryegrass and half lucerne were baled following a 2-day wilting period. Half of the bales were net-tied and the other half film-tied. The bales were wrapped with 4 or 6 layers of stretch film and stored outside, half on their ends and half on their curved surfaces, for 180 days. The mechanical, fermentative and microbiological aspects were investigated. The work rate was not affected by the tying method. No evident damage to the film used for tying was observed before or after ejection from the baler or after the mechanical handling using a typical bale squeeze. Plastic consumption for film-tying was slightly higher, but mould on the bale surface was reduced compared to the net-tying method. This study has shown that film-tying could represent an interesting alternative to net-tying when preparing round bales for making silage.

The use of plastic film instead of netting when tying round. bales for wrapped baled silage.

TABACCO, Ernesto;BORREANI, Giorgio
2011-01-01

Abstract

The possibility of replacing net with film to tie large round bales for silage making was investigated. A specifically designed polyethylene film has been developed and used to replace the typical net wrapping. A film-tying device, which was already on the market, was fitted to a variable chamber round baler and used instead of the standard net-tying system. A total of 48 round bales, consisting of half Italian ryegrass and half lucerne were baled following a 2-day wilting period. Half of the bales were net-tied and the other half film-tied. The bales were wrapped with 4 or 6 layers of stretch film and stored outside, half on their ends and half on their curved surfaces, for 180 days. The mechanical, fermentative and microbiological aspects were investigated. The work rate was not affected by the tying method. No evident damage to the film used for tying was observed before or after ejection from the baler or after the mechanical handling using a typical bale squeeze. Plastic consumption for film-tying was slightly higher, but mould on the bale surface was reduced compared to the net-tying method. This study has shown that film-tying could represent an interesting alternative to net-tying when preparing round bales for making silage.
2011
Inglese
Esperti anonimi
108
1
1
8
8
http://www.journals.elsevier.com/biosystems-engineering/
foraggi; rotoballe fasciate; film legatura; qualità insilato
ITALIA
262
3
C. Bisaglia; E. Tabacco; G. Borreani
info:eu-repo/semantics/article
reserved
03-CONTRIBUTO IN RIVISTA::03A-Articolo su Rivista
File in questo prodotto:
File Dimensione Formato  
Biosystems Engineering 2011.pdf

Accesso riservato

Tipo di file: PDF EDITORIALE
Dimensione 367.61 kB
Formato Adobe PDF
367.61 kB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/2318/129911
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 14
  • ???jsp.display-item.citation.isi??? 11
social impact