SUMMARY In the last decade the use of passive methods has become appealing in reconstructing the properties of the propagation medium by seismic ambient noise data, without the use of localized natural or artificial sources. A temporary seismic network was installed in the urban area of Benevento (southern Italy) in order to characterize the shallow structure of the city using stable methods for the analysis of the seismic noise continuously acquired by stations. The city of Benevento is one of the italian areas with highest seismic hazard, and at present the region is affected by low energy swarms and sparse events (Ml ≤ 4.1). It has been struck by several destructive historical earthquakes, the strongest of which occurred in 1456, 1688, 1805 with associated MCS intensity up to X-XI. We used the sixteen seismic stations installed in Benevento to record ambient noise for about 1 month. The stations were equipped with different seismic instruments: (i) digitizers Quanterra Q330 connected to Le3d-5 s short-period sensors; (ii) Nanometrics Centaur digitizers coupled with Trillium Compact 120s broad-band velocimeters; (iii) one station with Episensor force balance accelerometer connected to a D6BB-DIN Staneo digitizer. Interstations Green's functions were reconstructed by the cross-correlation of continuous ambient noise data, and surface waves signals were extracted from Green's Functions (GFs) for investigating the elastic properties of the subsurface structure. In this regard, we performed the beamforming analysis to test the hypothesis of isotropy distribution of noise sources on which the cross-correlation method is based, and the particle motion analysis to confirm the presence of surface Rayleigh waves in the GFs. We analysed the temporal stability of the cross-correlated signals and the results show that 2 weeks of continuous measurements are sufficient to stabilize the surface waves signal extracted from the GFs. The phase velocity dispersion curves are computed for 115 station pairs through the use of a far-field representation of the surface-wave GFs and an image transformation technique. Our strategy based on cross-correlation analysis provides robust phase-velocity dispersion curves that vary approximately from 1.4 km s -1 at 0.7 Hz to 0.6 km s -1 at 5 Hz. Different pairs were selected for the inversion of phase-velocity dispersion curves aimed to derive 1-D shear-wave velocity (Vs) profiles (up to a maximum depth of about 500 m) representative of some areas of the city characterized by different soil deposits.
Seismic noise cross-correlation in the urban area of Benevento city (Southern Italy)
Adinolfi G. M.;
2019-01-01
Abstract
SUMMARY In the last decade the use of passive methods has become appealing in reconstructing the properties of the propagation medium by seismic ambient noise data, without the use of localized natural or artificial sources. A temporary seismic network was installed in the urban area of Benevento (southern Italy) in order to characterize the shallow structure of the city using stable methods for the analysis of the seismic noise continuously acquired by stations. The city of Benevento is one of the italian areas with highest seismic hazard, and at present the region is affected by low energy swarms and sparse events (Ml ≤ 4.1). It has been struck by several destructive historical earthquakes, the strongest of which occurred in 1456, 1688, 1805 with associated MCS intensity up to X-XI. We used the sixteen seismic stations installed in Benevento to record ambient noise for about 1 month. The stations were equipped with different seismic instruments: (i) digitizers Quanterra Q330 connected to Le3d-5 s short-period sensors; (ii) Nanometrics Centaur digitizers coupled with Trillium Compact 120s broad-band velocimeters; (iii) one station with Episensor force balance accelerometer connected to a D6BB-DIN Staneo digitizer. Interstations Green's functions were reconstructed by the cross-correlation of continuous ambient noise data, and surface waves signals were extracted from Green's Functions (GFs) for investigating the elastic properties of the subsurface structure. In this regard, we performed the beamforming analysis to test the hypothesis of isotropy distribution of noise sources on which the cross-correlation method is based, and the particle motion analysis to confirm the presence of surface Rayleigh waves in the GFs. We analysed the temporal stability of the cross-correlated signals and the results show that 2 weeks of continuous measurements are sufficient to stabilize the surface waves signal extracted from the GFs. The phase velocity dispersion curves are computed for 115 station pairs through the use of a far-field representation of the surface-wave GFs and an image transformation technique. Our strategy based on cross-correlation analysis provides robust phase-velocity dispersion curves that vary approximately from 1.4 km s -1 at 0.7 Hz to 0.6 km s -1 at 5 Hz. Different pairs were selected for the inversion of phase-velocity dispersion curves aimed to derive 1-D shear-wave velocity (Vs) profiles (up to a maximum depth of about 500 m) representative of some areas of the city characterized by different soil deposits.
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
